Then enter the measurements.

In the quantity box state the number of bends.

indicate weather the sizes are window size (size of fixing position) or track size (measurement at the face of the track)

It is recommended that no more than 180 degrees in total for bends be operated with a single motor( ie. 2 x 90 degree or 4 x 45 degree bends). If you have a bay with a total of more than 180 degrees you will need to use 2 motors in tandem you will need the 6200 system

When activated it will start slowly then speed up until it is close to its stop point at which time it will slow to a stop at the point you set.

These

Can be bent for bay windows.

With its elegant design, a powerful 24 Volt motor and simplicity to combine several systems make the 6200 suitable for the most demanding of interior applications.

6200 shown here with extension bracket and return for the curtain (not supplied as standard).

One motor will operate up to 12mt of track and up to 18mt when 2 motors are used in tandem.

It is recommended that no more than 180 degrees in total for bends be operated with a single motor(eg.2 x 90o or 4 x 45o). If you have more than a total of 180o you will need to use 2 motors in tandem

Price on application for lengths longer than 6mt (Cost approx. £18 Per 50cm) 
Click Here for load table

There is an option to use the 6010 glider, this option will reduce the load down to a maximum of 8kg 

Wall mounted or table top will operate multiple systems in infrared range 


This product is not discounted except registration discount.   £201.25  Including VAT at 15%